Indirect Fired Heaters

NOTE: To move this equipment, it would need to go North up to the Wildhay River Road, then over to Hwy #40.

30” firetube.

Some parts have been removed and re-used else-where. In particular, the flame control & actuation arm on the choke.

4” 2500 RTJ Preheat coils

6” 900 reheat coils

2” 600 fuel gas heating coil

Cameron choke

Canalta 6” 600 dual chamber meter run.

15’6” high (building & skid)

15’6” wide shipping x 49’6” long shipping. The extra chunk of W.F. that is welded on needs to be cut off, and the flame arrester & its stand need to be removed to be within those dimensions.

***This unit was installed elsewhere (as evidenced by previous pile cut off), but does not appear to have ever been started up.***

Comes with condensate conditioner and fuel gas scrubber MDMT: -28 Celsius @ 9300 kPa MAWP: 9300 kPa @ 93 Celsius Test Pressure: 12,090 kPa CA: 3.2 mm Shell thickness: 53.35 mm  Shell material = SA 516 70N Decommissioned November 2010. Last inspections records available are from 2008. Ultrasonic Corrosion Mapping (AUT) was completed in 2010. Apoxy coating was applied in the areas where the internal coating was inadequate.

Generators;

Main:  

• Waukesha F18GL LCR, 398HP, Feb 2010. Shut down October 2016 at 54803 hours.
• Connected to a Marathon Electric 275kW Synchronous AC Generator controlled with an InteliLite MRS19 control panel. Continuous prime power.

Secondary:

• Detroit Diesel, NAT GAS powered 255kW Kohler generator. Prime power. Controlled by a Kohler control panel

Other Notes:

• Transfer switch by Thomson Technologies “Automatic Transfer Controller TSC800”. Unit can run with one generator at a time, or both can run for a combined 530kW.
• Both engines have their own battery chargers.
• Package also has a 75kW Avtron load bank.

Other options include automated louvers, exhaust fan, fire eye & gas detection, AC powered interior lighting & heating and sound attenuation.

The main skid is 36’ long and 12’ wide with louver hoods removed. It is 9.5’ high, not including mufflers. The coolers would both ship separately.

New 100 BBL POP TANK 
Lined with Devoe 253
Insulated with black elastomeric paint
Has 2” nozzle near top
House 3” nozzle near bottom
Would need to add one 3” nozzle
Has tomcat gauge board system 
Has 24”x36” side man way 
Ladder and top safety hoop
2 lift lugs
Mounted on skid 

Delivery 1 to 1.5 weeks ARO

RT-1, PWHT
c/w water boot.
Dressed 3 phase.
c/w Nu-flo liquid turbines, Norriseal LCV
HLSD – Kimray level switches
Rosemount Transmitters.
6” – Fisher -ET inlet control valve.
6” – sour meter run
c/w – (2) 4” bridals
methanol pump & tank
(2) Catadyne heaters
Fuel gas scrubber
12’ x 20’ – Building & skid.

Solar Titan 130 Turbine (with ABB Generator) 

Stored and preserved in the original packaging from the manufacturer.
Ready to be delivered today.

Images of installed unit is the twin to the available unit sitting in crates.
Complete data package is available for potential buyers.
See supporting documents for additional information.

Please refer to supporting documents for more information.

Please refer to supporting documents for Glycol Fluid Analysis