(2) 150 KW (480V) Waukesha F11GSI / MaganaPlus Generators

1000kw Propak Generator with Instrument Air

Main Generator:
Waukesha 7042GL 1472hp (NAT. GAS)
Kato 6P6-1900 1000KW
Displayed: 130436hrs
Overhauled: 96380hrs
Current: 34056hrs

Black Start Gen:
John Deere 4045TF150C 100hp (Diesel)
Kohler 60REOZJ 78kw
1473hrs

Instrument Air:
Eagle SCI-8 Rotary Screw
Replaced Motor 2870hrs
Replaced Compressor 451hrs

Currently free and clear of pile, sitting in laydown yard - ready to load.

Please refer to supporting documents for more information.

General Specifications

Engine

• MTT (Marine Turbine Technologies)
• Split Shaft Gas Turbine
• Five Stage Axial – Single Stage Centrifugal Compressor
• Compressor
• Variable inlet guide vanes
• Pressure ratio - 7.2
• Combustion Chamber, Annular
• 22 gas nozzles
• High energy ignition
• Power Turbine
• Two stage reactive
• Power takeoff speed - 60-Hz 5800 rpm
• Vibration Transducer
• Accelerometer inlet casing
• Accelerometer rear turbine (available)

Reduction Gearbox

• Single Reduction Parallel Shaft 1800 RPM
• Vibration (casing, radial and proximity probes)
• Temperature RTD at each Journal Bearing

Generator

• 4 Pole, 3 Phase, 60-Hz, 4 Wire WYE Connection
• Synchronous w/Permanent Magnet Generator Exciter
• 2 Regreasable Anti-Friction Bearings
• Temperature Rise – 105 Deg C / 40 Deg C
• NEMA Class F Insulation
• Enclosure IP-23 Open Drip Proof w/Filter

Enclosure

• Complete Package
• Fire and Gas Detection
• Fire Suppression (available)

Starting System

• Hydraulic via Onboard HPU
• Black Start Capable

Rebuilt and ran for approx 6 months.

Diesel Backup:
Katolight Corp
John Deer D300FRJ4T2 Engine
300KW
1800 RPM
60Hz
Serial #: 122831-0206

Backup has approx 2000 hours
 

Generators;

Main:  

• Waukesha F18GL LCR, 398HP, Feb 2010. Shut down October 2016 at 54803 hours.
• Connected to a Marathon Electric 275kW Synchronous AC Generator controlled with an InteliLite MRS19 control panel. Continuous prime power.

Secondary:

• Detroit Diesel, NAT GAS powered 255kW Kohler generator. Prime power. Controlled by a Kohler control panel

Other Notes:

• Transfer switch by Thomson Technologies “Automatic Transfer Controller TSC800”. Unit can run with one generator at a time, or both can run for a combined 530kW.
• Both engines have their own battery chargers.
• Package also has a 75kW Avtron load bank.

Other options include automated louvers, exhaust fan, fire eye & gas detection, AC powered interior lighting & heating and sound attenuation.

The main skid is 36’ long and 12’ wide with louver hoods removed. It is 9.5’ high, not including mufflers. The coolers would both ship separately.

Solar Titan 130 Turbine (with ABB Generator) 

Stored and preserved in the original packaging from the manufacturer.
Ready to be delivered today.

Images of installed unit is the twin to the available unit sitting in crates.
Complete data package is available for potential buyers.
See supporting documents for additional information.

• (1) building containing (3) gensets, available whole or piecemeal
• 400 kW each, 1.2 MW total
• Load bank: Power System Plus SLBA-200C
• Cooler: GEA Rainey H84-1260
• Control panel: Thomson GCS 2200
• 2-ton overhead crane

Includes Instrument Air Package, 2011, Electric, 7.5 hp, 460V, Vane COMPAIR, model HV05, 130 psig.

This genset package also contains the MCC & boiler for this site. The MCC end contains an obsolete PLC, furnace, 24VDC rectifier, and main breaker system for the site. The genset end of the building contains a main & standby generator, as well as the switchgear & control panel for the gensets. The boiler & pumps for heating the other buildings is also in this end of the building. The boiler is a Raytherm 2.25MMBTU/hr unit. S/D spring 2019

MORE PICTURES TO COME

Description:

1. GE 7EA GTG Packaged Power Plant.

The package comprises the following major components along with all GE scope of supply and auxiliaries:

• Frame 7EA Gas Turbine model PG7001EA (7E.03)

• Dry Low NOx (for DLN 1.0 Combustion System)

• Natural gas single fuel supply

• Output/Heat Rate 87MW and 10,480 btu/kwh at 1916 ft

• Includes GE PIP package (minus Stg 3 Aero), 2055F firing temp.

• Inlet/Exhaust: Pressure drop: 3.5/5.5 inches of H2O

• Design site elevation: approx. 1916ft above sea level.

• Hours: factory test fire only, ie New.

• Control System; MKV1e Speedtronic TMR.

• Generator; GE/Andritz

• Frame: BDAX (Brushless)

• Excitation: GE EX2100

• Terminal Voltage: 13.8Kv (2 pole, 3-phase, Wye conn.)

• Frequency/Power Factor: 60 Hz/0.85 pf

• Rated Output: 86.5 mw/101.8 MVA

• 52G synchronizing breaker compartment included @ 13.8KV incl. all protection relays etc.

• Cooling: Air-cooled.

• Design for Canadian Market. Stored in accordance with GE's storage/preservation requirements.

Additional Options:Combustor Components to be selected and agreed upon between buyer and seller. Contact seller for more information